Volta Pellet Stove Installation and Operation Manual
__________________________________________________________________________________________________ 11
2.2
REGULATIONS COVERING PELLET STOVE INSTALLATION
When installed and operated as described in these instructions, this pellet stove is suitable for use as
a freestanding heater in residential installations.
In Canada, the CSA B365 Installation Code for Solid Fuel Burning Appliances and Equipment and the
CSA C22.1 Canadian National Electrical Code are to be followed in the absence of local code
requirements. In the USA, the ANSI NFPA 211 Standard for Chimneys, Fireplaces, Vents and Solid
Fuel-Burning Appliances and the ANSI NFPA 70 National Electrical Code are to be followed in the
absence of local code requirements.
This stove must be connected to a pellet vent system complying with the requirements for Pellet
Vent in the standards UL 103, UL 641, ULC S629M, CAN/ULC S609 and ULC/ORD C441 or to a code-
approved masonry chimney with a stainless steel flue liner.
2.3
BEFORE OPERATING YOUR STOVE
Some minor installation and adjustment are required prior to use:
If your unit has the optional LCD touch screen sliding support, it can be installed on the left at the
back of the stove; (see
Appendix B:
LCD Touch Screen Supports
).
If you do not use the optional LCD touch screen sliding support, you can install the LCD touch
screen wall mount support provided in the owner’s manual kit on the side or at the back of the
stove; (see
Appendix B:
LCD Touch Screen Supports
).
See that handle and door are well adjusted (see
section 8.1.9:
Door Adjustment
).
The stove must be leveled using threaded legs.
Make sure to remove all tools or accessories
(A-E)
that have been inserted in the stove for
transportation purposes (see following illustration).
Make sure the fresh air intake back draft shutter
(F)
works freely.
Remove the insulating film
(G)
from the Main Board Battery
(H)
.
If your stove is equipped with the auxiliary battery system, connect it to the stove (see
Appendix
C:
Optional Battery Holder kit (AC01452) and 24V (2X 12V) battery kit (AC01454)
)
NOTE: For first start-up, see Section 7:
Stove operation.
