ROMANCE 28 STOVE
14
Gas Piping
•
Route a 3/8" minimum NPT iron pipe gas line to the
desired location.
•
Install a shutoff valve to the gas line. Tighten
securely using a pipe joint compound.
•
Check the gas line piping for leaks. Use a soap and
water solution.
CAUTION:
DO NOT USE OPEN FLAME TO CHECK
LEAKS.
Logs Installation
1. Place the rear log (1) against the rear log holders.
Make sure grooves behind the log line up with the
holders.
2. Place logs (2) and (3) against the holders in the
middle of the burner. Make sure grooves behind
the logs line up with the holders.
3. Place log (4) on top of logs (1) and (2) in the
matching grooves.
4. Place log (5) on top of logs (1) and (3) in the
matching grooves.
WARNING : If you need to clean the logs, do it
with a flexible paint brush otherwise you will
break the logs.
f i r e - p a r t s . c o m
