osann LUPO ISOFIX, Quick Start Manual

Page: 21 / 48

Fitti ng the car seat for 9-18 kg
1. Rotate out the Isofi x connectors unti l you hear ”Click”. Check that the Isofi x connector is moving
within the angle of 15°, and cannot turn around.
2. Pull aft erwards the black plasti c coat of Isofi x connectors unti l red appears in the window.
3. Put the red plasti c protectors on the correct positi on on the car, in order that the Isofi x connec-
tors can get into these protectors.
4. Place the child safety seat on the vehicle‘s seat. Push the Isofi x connectors towards the fi xed
points unti l green appears in the window.
5. Open the vehicle latch connector cover, let top tether hook lock the latch anchorage points to
make sure the tether is fully ti ghtened. At this ti me, the latch connect will show the green window
as well. So the child car seat is fi rmly pressed against the vehicle seat backrest.
If in doubt, consult either the child restraint manufacturer or the retailer.
WARNING: The car seat belt cannot be used to any identi fi ed forcing point.
Adjust the headrest height
According to children‘s diff erent height, the head-
rest can be adjusted up and down.
1. Put one hand on the backrest.
2. Pull the red butt on with your other hand.
3. Make the headrest up and down as you need.
Make sure that the positi on fi ts for your child.
EN