OSANG Healthcare GluNEO Lite Smart, Instructions For Use Manual

Page: 13 / 53

Temperature Unit
After pressing and
releasing either
▲ or ▼
buttons to set or and
push button.
Number of days for
average
After pressing and releasing
either
▲
or
▼
buttons to set
the number of days for
average calculation (3
different settings possible),
push
button.
Alarm on/off
After pressing and
releasing either
▲ or ▼
buttons to turn the alarm
on/off, push
button.
Alarm time
After pressing and releasing
either
▲
or
▼
buttons to set
the alarm hour and minute,
push
button.
Alarm
After programming the
number of desired alarms
(5 alarms possible),push
button.
CAUTION
1. VERY IMPORTANT: Set the right test unit.
Your GluNEO Lite Smart Meter is pre-set to mg/dL as test unit. A wrong test unit will
lead to wrong test result display. Please consult your healthcare professional if you’re
not sure which test unit to use. Without setting the date properly, the average
glucose level and the results in memory will not show proper values. It is
recommended to set the glucose test meter before use and also when new batteries
are installed.
2. You cannot test your blood glucose in the setting mode.
3. To turn the meter off during the setup, press for at least 3 seconds.