6
3
LONG TERM STORAGE
SPECIFICATIONS
Model Number
CPW110
Order Code
OSA-279-6110K
Nominal Voltage
230v~50 Hz
Power Consumption
1900W
Working Pressure
110bar (1595PSI)
Maximum Permissible Pump Pressure
200bar (2900PSI)
Working Flow Rate
6.2bar (90PSI) 6 1/min
Maximum Water Supply Pressure
4bar
Motor Rotation Speed
2800rpm
Maximum Water Temperature
50
°
C
Noise Level
<90db(A)
Water Inlet Size
3/4
”
Vibration Level
1m/s
2
Water Protection
IPx5
Hose Length
5m
Power Cord Length
5.3m
Assembled Dimensions
W45 x D45 x H105cm
Net Weight
16kg
COMMON REFERENCE POINTS
BOX CONTENTS
GUN
Frost can destroy an incompletely emptied unit. The pressure washer must be stored in a
frost-free environment, ensuring that the hose is coiled without any kinks in it.
After long term storage without operation, it is possible that scales have formed inside the
machine, making it difficult to start. In such conditions it is recommended to turn off and
disconnect the power supply and rotate the motor by hand. This is achieved by putting a
screwdriver through the ventilation grill at the back of the pressure washer and turning the
motor several times (See fig 21). This will help to avoid excessive current draw on the
motor and the power supply.
Fig. 21
MAINTENANCE
OPERATION
continued
The Osaki Pressure Washer is maintenance-free. However regular inspection of the water
inlet filter on the side will prevent any blockage restricting the water supply to the pump
(see fig 20).
N.B. Assembly tools and mains water connector are not provided with this product.
Main body
Fig. 20
DETERGENT CONTAINER
ON/OFF SWITCH
WATER INLET
CABLE HOLDER
HIGH PRESSURE OUTLET
HEAVY DUTY INDUCTION MOTOR
ADJUSTABLE
PRESSURE
First turn off the spray lance and then
slide the nozzle towards yourself for high
pressure or away for low pressure. (See
fig. 17 and 18).
INTEGRATED
DETERGENT TANK
When using your pressure washer for cleaning, there are specially formulated
detergents that can be used, depending on what job you are doing. For example, if
you are cleaning your car, use a detergent with wax for extra shine.
1.
Put detergent into the tank.
2.
Adjust the lance to the low pressure position.
3.
Squeeze the trigger, the gun will spray liquid detergent mixed with water.
4.
To avoid blockages, flush the detergent bottle with clean water after use.
GUN SAFETY LOCK
When you stop the machine, it is necessary to use the safety lock in order to avoid
accidental activation of the pressure washer (See fig. 19).
Fig. 19
Fig. 17
Fig. 18
Curved handle
Detergent
container
Upright pole with high
pressure hose assembly
Upright pole
Gunstock holder
Gunstock hook
Crank handle
Power cord hook
Long screw x 7
Short screw x 2
High pressure
connecting hose
Gun
Lance extension
Adjustable spray lance
Low pressure
High pressure
Lock
on
