OSAKA- CI 49 Operating instructions. PAGE 5
t
- U KEY OPERATING MODE: This parameter permits to
decide the operating mode of the frontal U key and the
possibilities are:
0 = Key disable
1 = RESET
6- PROBLEMS, MAINTENANCE AND WARRANTY
6.1 – CLEANING
It’s recommended to clean the instrument only with a cloth
welted with water or with a detergent neither abrasive nor
containing solvents.
6.2 – WARRANTY AND REPAIRS
The instrument is under warranty against construction vices or
defected material, noticed within 12 months from delivery date.
The warranty is limited to the repairs or to the substitution of
the instrument. The eventual opening of the housing, the
violation of the instrument or the wrong use and installation of
the product means the automatic decay of the warranty.
In case of defected instrument, noticed in warranty period or
out of warranty, do contact our sales department to obtain the
shipment authorisation.
The defected product must be shipped to OSAKA with the
detailed description of the failures found and without any fees
or charge for OSAKA, safe different agreements.
7 - TECHNICAL DATA
7.1 – ELECTRICAL DATA
Power supply: 12 VDC/VAC, 24, 115, 230 VAC +/- 10%
Frequency AC: 50/60 Hz
Power consumption: 3 VA approx.
Input/s: 2 digital inputs for Count (CNT) and Reset (RES) for
voltage-free contacts or voltage signals (the same voltage
supply value).
Output/s: Up to 2 outputs. Relay SPDT (8 A-AC1, 3 A-AC3 /
250 VAC); or in tension to drive SSR (12VDC/15 mA).
Electrical life for relay outputs: 100000 operat.
Voltage inputs absorption: 1 mA Max.
Installation category: II
Protection class against electric shock: Class II for Front panel
Insulation: Reinforced insulation between the low voltage
section (supply and relay outputs) and the front panel;
Reinforced insulation between the low voltage section (supply
and relay outputs) and the extra low voltage section (inputs,
SSR outputs); Reinforced insulation between the extra low
voltage section (SSR outputs) and voltage inputs.
7.2 – MECHANICAL DATA
Housing: Self-extinguishing plastic, UL 94 V0
Dimensions: 48 x 48 mm DIN, depth 98 mm
Weight: 200 g approx.
Mounting: Flush in panel in 45 x 45 mm hole
Connections: 2 x 1 mm
2
screw terminals block
Degree of front panel protection : IP 54 mounted in panel with
gasket
Pollution situation: 2
Operating temperature: 0 ... 50 °C
Operating humidity: 30 ... 95 RH% without condensation
Storage temperature: -10 ... +60 °C
7.3 – MECHANICAL DIMENSIONS, PANEL CUT OUT AND
FIXING DEVICE [mm]
7.4 – FUNCTIONAL DATA
Outputs operating mode: 3 modes for OUT 1: RESTART,
RESTART-LAP, COUNT. 4 modes for OUT 2: like OUT1, ON
during count, like OUT1 with set C2 absolute or relative in
advance.
Measurement range: 9999 Max.
Max counting input frequency: programmable from 2Hz up
1000 Hz
RES Input delay: 15 m sec. Max.
Display: 4 Digit Red h 12 mm
Compliance: ECC directive EMC 89/336 (EN 61326), ECC
directive LV 73/23 and 93/68 (EN 61010-1)
7.5 – INSTRUMENT CODE
CI
= formato (48x48), Ip65
= formato (72x72),
Ip65
= 230 Vac
= 24 Vac
= 2 relés
= 110 Vac
= 12 Vac/d c
= a la cone xión
= standard
= salid a SSR+ Relé
-
C
SR
4 9
73
A
B
E
D
