INSTALLATION
Installation
Step 4. Assemble left and right shoulder and armrest
0) Unscrew the M6 bolts on the seat frame with cross screwdriver.G)Lift shoulder and armrest, put shoulder massage
device inside near to backrest side, and put fixed axle 1 into fixed hole 1 on backrest side, and make shoulder in right
position.Q>Connect the wire from shoulder part to the socket on the side backrest.@Make fixed hole 2 on top of shoulder
part align to fixed axle 2 which on top of backrest.@Make two fixed hole 3 on shoulder align to the two fixed axle 3 on
the side of backrest.@Put the mentioned fixed axle to fixed hole and insert to right position, move downward the shoulder,
and armrest put the square tube on armrest into plate on seat frame side, it is completely fixed until you can not move
downward any more.(Z)Make the front and back panel on armrest match bolt hole on the seat metal frame, screw on the
M6 screws tightly.®Connect the air hose from armrest to the air hose from seat.(2)Connect the LED wire from
armrest to the LED wire from seat. Note: Please make sure not to squeeze the air hose ,LED wire during installation.
CD
Bolts
l
Four bolts in the
four corners
..
�
··············�:::: ..
••••
••••••••••
Axle 1
·•••••••••••·••
®
@
••••
•··
Side piece of sl�
·········
·······
·
·
..
..
®
armrest
@
Seat air hose
Step 5. Installation of left and right side airbags of seat and remote controller
Assemble left and right side airbags of seat:Q)Take out the left and right side airbags of seat.make the side with zipper
face to the seat.make the two cylindrical pins align to the two hole on the seat frame.then press down straightly.make
sure the connect tightly.CT) Connect the air hose from air bag to the air hose connector on the back side of seat, around
the zipper of air bag, make sure the connect tightly. Assemble controller and bracket: Screw out 3pcs M5*15 screws on
the outward of right armrest, put controller bracket to the hole, and fix with 3 screws, cover screws by the cover on
support bracket, then put controller to controller holder.
Air hose connector on seat frame
Two holes on
seat frame
www.osadaindia.com
Air hose connect
with air hose
connector around
�
:::::s===�="
zipper of airbags
INSTALLATION
Installation
Step 6. Connect the zipper or velcro
:::-=---
\;\
Put the back seat cushion, head pad onto the backre�,
-\
r
iCa. \
)
and connect the two parts with zipper and velcro.
\
,;
�}\
�J.''
Warm tips
Head pad
In order to get exact correct body test data for comfortable massage effect, when you sit on the chair,
please make the bottom rim of the head pad flush with your ears before zippering the said two parts.
@
Put the other end
o
f·
;
-
"T""
---JII.
pillow through the
fixed leather above
the back cushion.
@
.
Zipper position on
Back seat _cushion
the backrest
connect with
backrest by
zipperJA.
Installation of back seat
cushion should pay
attention to: make the
Backrest
Head pad
middle part of back
cushion align to the
middle part of backrest
Step 7. After the Assembly
After the assembly, please operate
the chair in this order:
Back seat cushion
Back seat cushion
connect to the two
sides of backrest
by zipper
®
OPlug the cable line in the hole a on the
power box as shown in the right picture.
•
Hole A connect with one end of cable line.
•
Hole b insert plug of the remote control.
@Insert the plug of cable line into the socket.
@Switch on.
[ Power Switch 0/1, press I to power on,
press O to power off.]
0Enjoy the massage by using the remote
control.
A
Make sure the switch is off before
you insert the plug of cable line
into the socket.
Back seat cushion
connect with seat
by zipper,meanwhile
connect the velcros
between them.
CD
