%&'
In case of malfunctions, please refer to the following table before asking for the repair work.
Make sure the power plug is disconnected before checking. If the problem is not solved, please
consult with the dealer or the distributor.
Symptom
Check
Remedy
Is power plug fixed to the mains
correctly?
Fix the plug tightly.
Is the remote controller directed
to the receiver?
Direct the remote controller to
the receiver.
Anything blocking between the
remote and receiver?
Take off the blocking item, or
change the receiver position.
Is the sun or lights reflected on
the receiver?
Change the position of the
receiver
Batteries of remote low?
Change the two batteries in the
remote.(AAA
type)
Is the heat prevention circuitry
on?
Cool off the motor and operate
again after 10-20 minutes.
Reset the stored position, using
UP operation.
Is the receiver cable extended?
If the receiver cable is extended,
it is easily affected by the noises.
Any modifications on the product
or the accessories would be
subject to non-warranty.
The screen does not operate
Is there a power failure during
operation?
If the power fails during
operation, UP or DOWN
operation restores the screen to
reset.
No adjustments on the lift
down position
Conf Infrared m the procedures
explained in the manual.
Store up the screen, and wait
more than 1 second for
re-setting.
OSI CO., LTD.
Room 1605, 16/F, Seaview Centre, 139 Hoi Bun Road,
Kwun Tong, Kowloon, Hong Kong
PHONE : +852-3580-0087 FAX : +852-2367-4300
E-mail :
U R L : http://www.os-worldwide.com
