How to use
Pull out the power plug, when the screen is not used for long.
The leak may cause a fire.
Storing the screen
When the screen is deployed, push the
button of
the remote controller.
The screen is rolled up and stored, and it stops
automatically
.
Stopping the screen
Please push the
button whenever you want to
stop the operation
.
Deploying the screen
Please confirm the screen is stored, and push the
button of the remote controller. The screen is
deployed to a prescribed projection position, and it stops
automatically.
Change of projection position
The projection position can be changed as desired.
To lift up the projetion positon
!
Stop at the desired position
Use
&
buttons and push
button at the desired position.
"
Memorizing the position
1. At the desired position, push
button
for 5-6 seconds, and then push
button within 2 seconds.
2. Upon receiving the command, the screen
moves up approx. 10cm, and then
stops at the preset position.
UP button
(The screen moves up.)
STOP button
(The screen stops.)
DOWN button
(The screen moves down.)
