4
User Guide - Multi-Point Visor Car Kit
(4) Answer the Second Call during a Call (3 way call or two link function) When receiving a second call, press “MFB” button twice to
hold the first call on line and answer the second call.
(5) Reject the Second Call during a Call (3 way call or two link function) When receiving a second call, press and hold the “MFB”
button for 3 seconds to reject the second mobile phone call.
Please follow the steps below to reset the speakerphone to its original setting and remove all the previous paired devices.
(1) Ensure the Multi Point is in standby mode.
(2) Press and hold both of “V+” and “V-” buttons for 10 seconds until the blue and red LED flash 5 times, the Multi Point will then
resume to standby mode. Please follow the Pairing steps to pair a new device.
Note: If the Multi Point is connected with a mobile phone prior to being reset, the Multi Point will automatically enter pairing mode after
it has been restored. If the Speakerphone is not connected with the mobile device before being reset, it will be in standby mode after it
has been restored.
(6) Switch between 2 Phone Calls (3 way call or two link function)
a. When having 2 calls on the line, press “MFB” button twice to switch between these 2 phone calls.
b. When having 2 calls on the line, short press the “MFB” button once to end the current call and stay with the other call.
Low Voltage Protection of Battery
LED Indication
Restore to Default Setting
When the voltage of battery decreases to 3.3V, the red LED will flash once every 3 seconds, the Multi Point will then power off
automatically when the voltage drops below 3.0V.
