3
User Guide - Multi-Point Visor Car Kit
Disconnecting the link
Using the Speakerphone
Multipoint Connection
When you need to connect your speakerphone with another Bluetooth enabled mobile device, please follow
the steps below to disconnect the speakerphone with the currently paired device.
Note: When losing the connection/link, the speakerphone will automatically power off in 15 minutes. The blue
LED will flash twice every 3 seconds when the speakerphone is not connected with a mobile phone.
(1) Power off the speakerphone.
(2) Select “Disconnect” on the Bluetooth device list on your mobile device to remove the connection.
(1) Answering a Call
When receiving a phone call, short press the “MFB” button to answer the
incoming call.
(2) Ending a Call Short press the “MFB” button to end a call.
(3) Reject a Call When you hear the ringing tone, press and hold the “MFB” button for 2 seconds to reject the call.
(1) Activate Multipoint Connection
The default setting of the speakerphone’s multipoint function is OFF.
You can activate the multipoint function for connecting 2 mobile phones at the same time.
a. Multipoint ON: Under standby mode, press and hold “V+” button for 3 seconds until you hear a beep.
b. Multipoint OFF: Under standby mode, press and hold the “V-” button for 3 seconds until you hear a beep. The speakerphone will
turn off the multipoint function and power off automatically. When the Multi Point is powered on again, it will only connect to the
last connected Bluetooth device.
(2) Multipoint Pairing
a. First mobile phone: Pair the speakerphone with one of the Bluetooth-enabled mobile phones.
b. Second mobile phone: Power OFF the speakerphone. Press and
hold the “MFB” button for 5 seconds to enter pairing mode again to pair and connect with the second mobile phone.
c. Connect with the first paired mobile phone to the speakerphone.
(3) Multipoint Connection/Link with 2 Mobile Phones
After the multipoint function is activated, please follow the steps below to connect with 2 Bluetooth enabled mobile phones at the
same time.
When powered on the speakerphone will automatically search and connect the last 2 mobile phones that have been connected
before.
(4) Voice Dial
If your mobile phone supports voice dialling, in standby mode, short press the “MFB” button and say the name of the person you
wish to call after you hear a beep.
Note: Please make sure to record a voice tag into the mobile phone before using voice dial function. Functionality varies depending
on the mobile phone models. Please refer to your mobile phone user guide for details.
(5) Last Number Re-Dialling
In standby mode, short press the “MFB” button twice to redial the last dialled number.
(6) Adjusting the Volume
During a call, press the “V+” or “V-” buttons repeatedly until you reach the desired volume level.
(7) Mute & Un-Mute
a: Mute: During a call, short press the “MUTE” button to mute the speakerphone. The red LED will flash on during mute mode.
b: Un-Mute: Short press the “MUTE” button during mute mode to unmute the speakerphone.
(8) Transferring Calls
a: Speakerphone to Mobile Phone: During a call, press both of “V+” and “V-” buttons, the call will then be transferred to your mobile
b: Mobile Phone to Speakerphone: Press both of “V+” and “V-” buttons to transfer the call to the speakerphone.
