Dongguan Ortur Intelligent Technologies Co., Ltd.
www.ortur3d.com www.ortur3dprinter.com
No. 56 Maxin Road, Changping Town, Dongguan 523565, Guangdong Province, China
10
Step 13.
Press the Reset Button (below the control knob) to disable the X and Y motors. Move the
print head by hand to the four corners of the hotbed. Using the leveling knobs, ensure there is a
0.1MM gap between the nozzle and the hotbed. A standard sheet of A4 paper is 0.1MM and can be
used to confirm the distance. You should be able to slide the paper between the nozzle and hotbed
and feel slight resistance.
Step 14.
Place a roll of filament on the spool holder, cut the filament at a 45° angle, pass it through
the filament sensor, extruder motor, into the filament tube until it reaches the print head. Insert the
supplied MicroSD Card into the slot, then on the LCD menu, navigate to “Print with SD”. Select the
testing Gcode file to ensure the printer is operating properly.
