background image

63

62

Batteries:

Sealed drive batteries (gel): .................................................. 2 x 12 V 75 Ah (20h)
Unsealed drive batteries (acid): ............................................ 2 x 12 V 95 Ah (20h)
Max. battery dimensions (LxWXH): ....................................... 353 x 175 x 190 mm
Permissible battery tilting angle: ...................................................................... 55°

Range (see 'Kilometric performance'):

Drive batteries (gel) 75 Ah (20h) at 6 km/h: ................................... approx. 50 km
Drive batteries (gel) 75 Ah (20h) at 10 km/h: ................................. approx. 30 km

Drive batteries (acid) 95 Ah (20h) at 6 km/h: ................................. approx. 70 km
Drive batteries (acid) 95 Ah (20h) at 10 km/h: ................................ approx. 50 km

Performance: (see 'Kilometric performance'):

Max. forward speed: ................................................ approx. 6 km/h and 10 km/h

Obstacle crossing upwards: ......................................................... approx. 100 mm
Obstacle crossing downwards: .................................................... approx. 100 mm
Turning radius: ............................................................................................ <2,5 m

Max. permissible rising gradient: .................................................................... 20%
Max. permissible falling gradient:................................................................... 20%
Max. permissible transverse gradient: ............................................................ 20%
Max. continuous hill-climbing ability: .............................................................. 15%
Stability against tipping over: .......................................................................... 20%

Weights (basic equipment):

Max. permissible total weight: .................................................................... 275 kg
Max. passenger weight ............................................................................... 130 kg
Max. additional loading: ............................................................................... 10 kg

Empty weight (with gel batteries): ................................................. approx. 137 kg
Empty weight (with acid batteries): ................................................ approx. 140 kg
Transport weight (with acid batteries): ........................................... approx. 140 kg

8.3 Model Touring 926

All data within the following table relates to the standard version of the stated
model.
Dimensional tolerance is ± 1.5 cm.

Model: ................................... Electric Wheelchair TOURING 926 /Code 9.926
Type plate location: .................... Under the seat, at the front right, on the chassis
Class of use as per DIN EN 12184: ............................................................. Classe C
Electrical system for the drive control: ......................................... 24 Volt/65A max.
Electrical system for the lighting: ..................................................................... 24 V

Dimensions:

Length (incl. foot plates): .............................................................. approx. 121 cm
Length (without foot plates): ......................................................... approx. 105 cm
Width: ............................................................................................. approx. 67 cm
Height (textile backrest): .............................................................................. 95 cm
Height (Ergopor backrest): ......................................................................... 105 cm
Height (with headrest): ..................................................................  122 – 136  cm

Seat height with textile seat cushion: ........................................................... 53 cm
Seat height with Ergorpor seat cushion: ....................................................... 59 cm
Seat width (infinitely-adjustable): ........................................................ 43 to 48 cm
Seat depth (adjustable by way of disassembly): .................................. 43 to 50 cm
Armrest height from seat (infinitely-adjustable): ................................. 19 to 27 cm

Drive wheel, pneumatic tyres, 2.5 bar max.): ........................ 16“ (ø435 x 95 mm)
Steering wheel (pneumatic tyres, 2.5 bar max.): ................... 13“ (ø325 x 95 mm)

Transport dimensions

Length (without foot plates): ......................................................... approx. 105 cm
Width: ............................................................................................. approx. 67 cm
Height (backrest folded onto seat): ................................................. approx. 80 cm

Ambient temperature: ...................................................................  -20°C to +40°C
Storage temperature: ...................................................................... -25°C to +50°C
Chassis material: .................................................................................... recyclable

The CE mark conforms with the EU directive 93/42EEC for
medical products in accordance with the medical products law.

Summary of Contents for TOURING 926






































Reviews: