28
28
Adjusting the seat depth
To adjust the seat depth, loosen the
clamping screw (fig. 28/
➀
) on each
side so far that no damage to the coat-
ing occurs during the adjustment.
☞
Note:
For the seat depth adjustment the
backrest should be leaned slightly
to the back so that the seat surface
can be freely moved at the back
cushion.
Then adjust the desired seat depth by
repositioning the seat surface (fig. 28,
direction of the arrow).
After the adjustment retighten the
clamping screws (fig. 28/
➀
) and check
the secure fit.
!
Attention:
During the adjustment the min./
max. seat depth is reached when
one marker each is reached on the
inner tube (fig. 28/
➁
).
Never adjust a smaller seat depth
than the marker permits. – Danger
of crushing!
1
2
