TROUBLESHOOTING
AVOID CRUSHING
. Make sure all personnel are clear of the implement. Lower implement to the
ground, place tractor in park, turn off engine, and remove key.
USE BAR STANDS TO SUPPORT THE IMPLEMENT.
Park implement on a clean, dry, and
level surface. An uneven surface could cause implement to shift or fall, resulting in injury or death, as well
as implement damage. Securely support all implement components that must be raised. Remove buildup
of grease, oil, or debris prior to adjusting implement.
DANGER
CAUTION
REMOVAL OF INTERNAL
CYLINDER
FOLD TOOLBAR:
1.
Be sure rigid locking pin is in storage posi-
tion (pg. 4 - 1)
2.
Fold wings over until they hit wing stops
so weight of wings are on stops.
CAUTION!
BE EXTREMELY CARE-
FUL WHEN WORKING AROUNG
UNSHIELDED SHARP EDGES. INJURY
MAY RESULT FROM CONTACT WITH
SHARP EDGES.
tees
5 - 4
DISCONNECT HYDRAULIC HOSES:
1.
Relieve hydraulic system pressure in
tractor.
2.
Unhook hydraulic hoses and store in a
clean area.
3.
Locate hydraulic tees near center of bar.
Mark hoses and tees for easy re-assembly.
Remove internal hoses from tee.
Cover open ends of hoses and tees to
protect debris from entering hydraulic
system.
DANGER
DANGER!
ESCAPING PRESSURIZED HYDRAULIC FLUID CAN PENETRATE SKIN,
RESULTING IN INJURY OR DEATH. RELIEVE HYDRAULIC SYSTEM PRESSURE
BEFORE CONNECTING OR DISCONNECTING TRACTOR. USE CARDBOARD OR
WOOD,
NOT BODY PARTS,
TO CHECK FOR SUSPECTED HYDRAULIC LEAKS.
WEAR PROTECTIVE GLOVES AND SAFETY GLASSES OR GOGGLES WHEN
WORKING WITH HYDRAULIC SYSTEMS. IF AN ACCIDENT OCCURS, SEE A DOC-
TOR IMMEDIATELY FOR PROPER TREATMENT.