PREPARATION AND SETUP
LIGHT & LIGHT BRACKET ASSEMBLY
Mount left and right light mounting brackets to light mount tabs located at the end of the center section (shown below). Use the provided 1/4” x 1” car-
riage bolts and flange nuts to mount each bracket to the toolbar. Mount Amber (orange) colored lights to the bracket with the hardware provided in the
light kit. Light bracket is universal and should work with both brands of lights available. Cable lead on light should be able to be strung thru rectangle
hole in light brackets. Amber lights will have lenses in front and back and should be visible from the front and back when toolbar is completely folded.
Adjust the light bracket according to the degree of fold as shown below.
Mount center red light brackets as shown below. Use provided 3/8” 7” x 7” U-bolts and nuts. Lights must each be mounted equally from the center of the
bar and be a total distance between 4 feet and 10 feet from each other.
Mount the red lights and string light cable thru rectangle hole in bracket. If lights are Cobo brand, there will be a left and right version of the red light
due to the design. Red lights will only have a lense on one side of the light, and it should be visible from the rear of the bar (like tail-lights) and not the
front. Use the hardware provided in the ag light kit to mount the lights to the brackets.
4’ to 10’
3 - 5
180 DEGREE POSITION
135 DEGREE POSITION
115 DEGREE POSITION
90 DEGREE POSITION
CENTER RED LIGHT BRACKETS