Orthman 125-087-02-EN-OM Operator'S Manual Download Page 7 | Manualshive

Page: 7 / 62

Orthman 125-087-02-EN-OM Operator'S Manual Download Page 7

INTRODUCTION

DR12x2 Row Hopper Planter OM-EN

1-3

Product Description

Orthman is known as a worldwide leader in versatile
stacking toolbars because we continually strive to meet
and exceed the changing needs of our customers. The
DR12x2 Row Hopper Planter provides rugged durability
and exceptional maneuverability, while offering greater
productivity with 36 in, 38 in, and 40 in row spacing.

The DR12x2 Row Hopper Planter features a dual-mount
hitch to accommodate for twin row or single row
operation. As part of the unique dual-mount hitch, the
hitch top link has two mounting locations for the tractor
3-point hitch.

An internal toolbar vacuum circuit has been designed into
the DR12x2 Row Hopper Planter. The vacuum air for the
seed meters is routed from each row unit to the internal
space of the toolbar, which is then connected to a
vacuum fan via a flex hose connected to another internal
toolbar vacuum outlet.

Purpose of This Manual

This manual is considered to be an integral component of
the DR12x2 Row Hopper Planter and is designed to
educate the owner and operators regarding safety,
operation, maintenance, troubleshooting, and component
identification.

All personnel involved in the operation of the DR12x2
Row Hopper Planter are responsible for reading and
understanding the entire contents of this manual. This
manual is designed to keep the operator safe and
knowledgeable as well as prolong the life of the product,
minimize downtime, and maximize field efficiency. This
manual should accompany the product if it is ever sold.

We would like to thank you for placing your confidence in
Orthman Mfg., Inc. Your DR12x2 Row Hopper Planter is
manufactured to meet the highest standards and is built
with Orthman precision and strength to increase your
agricultural operation’s dependability and profitability.

«
...
5
6
7
8
9
...
»

Summary of Contents for 125-087-02-EN-OM































































Reviews:

No comments