manualshive.com logo in svg

ORTECO HD 1000, Use And Maintenance Manual, Page: 5 / 142

Share
Download
ORTECO HD 1000 Use And Maintenance Manual Download Page 5

Scrapping the machine ................................................................................................................................ 90

Shifting on slopes procedure ..................................................................................................................... 39

Shifting procedure ......................................................................................................................................... 38

Sound emissions ............................................................................................................................................. 10

Starting the engine ........................................................................................................................................ 36

Starting the engine with the auxiliary battery .................................................................................... 37

Summary .............................................................................................................................................................III

Supplements .................................................................................................................................................... 17

System for adjusting/reducing the hammer drill frequency - instructions for use ................ 67

System for measuring the distance between the piles - instructions for assembly, use, 

and maintenance ........................................................................................................................................... 71

T

Technical assistance procedure....................................................................................................................3

Technical characteristics .................................................................................................................................9

Track gearmotor oil level check ................................................................................................................ 81

Track tension check ....................................................................................................................................... 82

Transportation procedure ........................................................................................................................... 21

U

Unauthorised uses ............................................................................................................................................6

Use and operation safety precautions .................................................................................................... 18

Use in cold environmental conditions .................................................................................................... 35

V

Versions .............................................................................................................................................................. 13

W
Warranty ...............................................................................................................................................................3

Summary of Contents for HD 1000















































































































































Reviews:

No comments