manualshive.com logo in svg

ORTECO HD 1000, Use And Maintenance Manual, Page: 3 / 142

Share
Download
ORTECO HD 1000 Use And Maintenance Manual Download Page 3

SUMMARY

1  GENERAL INFORMATION ..........................................................................................................................1

2  TECHNICAL INFORMATION .....................................................................................................................5

3  SAFETY INFORMATION .......................................................................................................................... 18

4  HANDLING AND TRANSPORTATION ................................................................................................. 21

5  ADJUSTMENT INFORMATION .............................................................................................................. 26

6  INFORMATION FOR USE ........................................................................................................................ 31

7  MAINTENANCE INFORMATION ........................................................................................................... 76

8  BREAKDOWN INFORMATION ............................................................................................................... 85

9  INFORMATION CONCERNING REPLACEMENTS ............................................................................. 86

A  ENCLOSURES ............................................................................................................................................. 91

ANALYTICAL INDEX

A

Accessories ....................................................................................................................................................... 16

Adjusting of “PROXIMITY device” that stops the hammer’s down stroke .................................. 27

Adjusting the “laser device” that stops the hammer’s down stroke ............................................. 29

Adjusting track tension ................................................................................................................................ 26

Advice for handling and transportation ................................................................................................ 21

Aim of the manual ............................................................................................................................................1

Analytical index .................................................................................................................................................III

Annexed documentation ...............................................................................................................................3

Assembly of pile driver on the crawler ................................................................................................... 25

Automatic verticality system -   instructions for use .......................................................................... 65

B

Blade raiser - instructions for assembly, use, and maintenance .................................................... 59

C

Checking and cleaning the supplementary air filter ......................................................................... 79

Cleaning and lubrication of hammer lifting chain ............................................................................. 83

Controls to run the machine ...................................................................................................................... 33

Core borer - instructions for assembly, use, and maintenance ...................................................... 45

D

Dashboard controls (base version) .......................................................................................................... 32

Declaration of conformity ........................................................................................................................... 12

Description of the controls  ........................................................................................................................ 31

Disclaimer notice ...............................................................................................................................................3

Drilling machine - instructions for assembly, use, and maintenance .......................................... 48

Drill - instructions for assembly, use, and maintenance ................................................................... 54

E

Electric generator - use and maintenance procedures..................................................................... 58

Emergency stop .............................................................................................................................................. 75

Engine identification ........................................................................................................................................3

Environmental operating limits ................................................................................................................ 11

Environmental protection precautions .................................................................................................. 20

F

Fire-prevention and first aid measures ................................................................................................... 20

G

Gas emissions .................................................................................................................................................. 11

General description ..........................................................................................................................................5

General safety warnings .............................................................................................................................. 18

Glossary of terms ...............................................................................................................................................4

Summary of Contents for HD 1000















































































































































Reviews:

No comments