![ORTAL Clear 100 LS Installation & Operation Manual Download Page 91](http://html1.mh-extra.com/html/ortal/clear-100-ls/clear-100-ls_installation-and-operation-manual_1654316091.webp)
APPENDIX C
10
Improper installation, adjustment, alteration, service or maintenance can cause
injury or property damage. Refer to this manual. For assistance or additional
information consult a qualified installer, service agency or the gas supplier.
WARNING
Failure to comply with these installation instructions will result in an improperly
installed and operating appliance, voiding its warranty. Any change to this appli-
ance and/or its operating controls is dangerous.
WARNING
Clothing or other flammable material should not be placed on or near the
appliance.
WARNING
Any safety screen or guard removed for servicing the appliance must be replaced
prior to operating the appliance.
WARNING
Note: Installation and repair should be done by a qualified service person only.
The appliance should be inspected before use and at least annually by a
professional service person. More frequent cleaning may be required due to
excessive lint from carpeting, bedding material, etcetera. It is imperative that
control compartments, burners and circulating air passageways of the
appliance be kept clean.
Do not use these appliances if any part has been under water. Immediately call
a qualified, professional service technician to inspect the appliance and to
replace any parts of the control system and any gas control which have been
under water.
Improper installation or use of this appliance can cause serious injury or death
from fire, burns, explosions or carbon monoxide poisoning.
WARNING
Only trim kit(s) supplied by the manufacturer shall be used in the installation of
this appliance.
Misc. Codes / Standards -
Summary of Contents for Clear 100 LS
