FRONT PANEL
MAIN POWER INDICATOR
The light is red when the unit is in standby.
When the unit is turned on, one input LED must light blue.
INPUT LEDs
The input LED shows which input is streaming to the output.
INPUT BUTTONS
There is two buttons for the input selection. Press Up or Down to go to select the next input.
FREQ BUTTON
This is the button to select the output sampling frequency.
FREQ LEDS
Led showing the output sampling frequency selected.
CLOCK SYSTEM LED
LOCK : This LED shows if the system is internally locked with a stable clock.
Ext. CLK : This LED indicates that the DAD is locked with an external clock.
FLASH USB SLOT
Slot for USB memory stick.
HEADPHONES
Headphone 6.35mm connector.
CONTROL BUTTONS
Previous:
Selects the previous song or channel (Only enabled with iPod, Flash USB, LAN, Webradio inputs)
Play:
Play & Pause (Only enabled with iPod, Flash USB, LAN, Webradio inputs)
Next:
Selects the next song or channel (Only enabled with iPod, Flash USB, LAN, Webradi inputs)
Vol+:
Increases the analog volume (Pre out & headphones)
Vol-:
Decreases the analog volume (Pre out & headphones)
Stby:
Turns the device into standby. Saves the configuration of the DAD
INFRARED SENSOR
Infrared sensor for the remote control. The only remote fully compatible is the Vanguard line remote
control. This remote is also compatible with the iDA and FAD which are products of the same line.
5/17
