Flash USB – LAN – Webradio
With a RJ45 cable, connect the DAD (LAN plug) to your internet cable. Turn on the DAD and select
the LAN, Webradio or Flash USB. You should hear the dynamic IP address of the DAD. Once you
got the IP address, open an internet page and type the IP address of the module in order to be
able to reconfigure it. As soon as you have entered the correct address, you should get an
interface which allows the user to reconfigure the module.
URL1
contains the adresse where all your 3 playlist are stocked. You can stock them on your
USBkey, on an webserver or on your NAS.
If you want only listen webradios and never LAN or Flash USB, you can just write your webradio
adresse in URL1. But, the input LAN and Flash USB will not function.
When you select input Webradio, the DAD will load the playlist000. If you want listen the next or
previous Webradio in your playlist000.m3u, you can press next or previous button.
When you select input LAN, the DAD will load the playlist001.
When you select input Flash USB, the DAD will load the playlist002.
IMPORTANT:
Your NAS must support HTTP access to its stored files.
13/17
..\playlist$NUM$.m3u
URL 1 :
..\playlist000.m3u
..\playlist001.m3u
..\playlist002.m3u
DAD input selection :
Webradio
DAD input selection :
LAN
DAD input selection :
Flash USB
Setup via the webserver
