Oromed ORO-N2 BASIC, Manual

Page: 53 / 70

– 53 –
Using rechargeable batteries
You can also operate this instrument using rechargeable batteries.
• Only use „NiMH” reusable batteries!
• If the battery symbol the batteries must be removed and rechar-
ged! They must not remain inside the instrument, as they may
become damaged through total discharge even when switched
off. The batteries must NOT be discharged in the blood pressure
monitor! If you do not intend to use the instrument for a week or
more, always remove the rechargeable batteries!
• Recharge these batteries using an external charger and follow ma-
nufacturer’s instructions carefully.
USING THE AC ADAPTER
You may also operate this monitor using the AC adapter (output 6V
DC/600 mA with Micro USB plug).
a) Ensure that the AC adapter and cable are not damaged.
b) Plug the adapter cable into the AC adapter port on the right side
of the blood pressure monitor.
c) Plug the adapter into your electrical outlet. When the AC adapter
is connected, no battery current is consumed.
Note: No power is taken from the batteries while the AC adap-
ter is connected to the monitor. If electrical power is interrupted,
(e.g., by accidental removal of the AC adapter from the outlet) the
monitor must be reset by removing the plug from the socket and
reinserting the AC adapter connection.
CARE AND MAINTENANCE
Wash hands after each time measurement.
If one device is used by different patients, wash hands before and
after each use.
a) Do not expose the device to either extreme temperatures, humi-
dity, dust or direct sunlight.