Orolia Spectracom VelaSync 1232, User Manual

Page: 89 / 268

GPS : GNSS reference
IRIG : IRIG reference
HVQ : HAVE QUICK reference
FREQ : Frequency reference
PPS : External 1PPS reference
PTP : PTP reference
ATC : ASCII time code reference
USER : User provided time
LOCL : Local reference (synced to itself)
INIT : NTP on server/peer is initializing
STEP : NTP on server/peer is performing initial synchronization step and
restarting
AUTH STATUS : Indicates if the selected reference is using MD5 authentication.
“None” indicates authentication not being used.
LAST : The number of seconds that have expired since this reference was last polled
for its time.
POLL : The polling interval, i.e. how often VelaSync is polling this NTP reference for
its time.
DELAY (ms) : The measured one-way delay between VelaSync and its selected ref-
erence.
2.10.8.2 NTP Servers: Adding, Configuring, Removing
To add, configure, or remove an NTP Server:
2.10 Configure NTP
CHAPTER
2
•
VelaSync 1232 User Manual Rev. 4 77