Technical Note
•
May 4, 2021
Page
3
[1]: Unpacking
On receipt of materials, unpack and inspect the contents and accessories (retain all original packaging for use in
return shipments, if necessary).
The following additional items are included with the
ancillary kit
for the field installation of option card(s). Some
of the parts listed below will be required for the installation (depending upon option card model, and installation loc-
ation).
Table 1-1:
Parts list, Ancillary Kit [1204-0000-0700]
Item
Quant.
Part Number
50-pin ribbon cable
1
CA20R-R200-0R21
Washer, flat, alum., #4, .125 thick
2
H032-0440-0002
Screw, M3-5, 18-8SS, 4 mm, thread lock
5
HM11R-03R5-0004
Standoff, M3 x 18 mm, hex, M-F, Zinc-pl. brass 2
HM50R-03R5-0018
Standoff, M3 x 12 mm, hex, M-F, Zinc-pl. brass 1
HM50R-03R5-0012
Cable tie
2
MP00000
In addition to the parts supplied with your option card ancillary kit, you will need a #1 Phillips head screwdriver, and
may need a cable tie clipper and 6mm nut driver.
[2]: Saving Refererence Priority Configuration
Note:
This step is
optional
.
When adding or removing option cards with reference inputs such as IRIG Input, ASCII Timecode Input, etc., any
user-defined Reference Priority configuration will be reset back to the factory default. This means that you will
need to re-configure the Reference Priority table at the end of the installation procedure.
To avoid this manual re-configuration, you can save your configuration:
Saving the System Configuration Files
To save (back up) the system configuration files:
1.
Navigate to
TOOLS > SYSTEM: Upgrade/Backup
.
2.
In the
Actions
panel, click the
Save Configuration
button.
SecureSync 2400 Option Card Field Installation Guide
