manualshive.com logo in svg

Orolia RC102, Installation Manual And User Manual, Page: 17 / 20

Share
Download
Orolia RC102 Installation Manual And User Manual Download Page 17

INSTALLATION MANUAL / USER MANUAL

REMOTE CONTROL PANEL RC102

PAGE: 14

JUL 18/2022

© 2022 Orolia S.A.S. All rights are strictly reserved. 

7. Technical characteristics and compatibility

A. Technical characteristics

(1) Environmental characteristics

Dimensions:

Refer to A. RC102 Outline dimensions and drilling mask, page 15

• RC102 with front plate 1a:

30 x 44 x 35 mm (1.73 x 1.18 x 1.38 in.).

• RC102 with front plate 1b:

53 x19.4 x 35 mm (2.08 x 0.76 x 1.38 in.).

Weight: 13 g. (0.028lbs).
Operating temperatures: -20°C to +55°C.
Storage temperatures: -55°C to +85°C.

(2) Electrical characteristics

3-position switch
• Type: ON / MOM / ARM.
• Contact type: Gold plate compatible with low current.
Visual indicator (LED)
• Color: red.

B. Compatibility list

ELT

PART NUMBER

KANNAD 406 AF COMPACT

S1840501-01 at amendment equal or 
higher than M.

KANNAD 406 AF COMPACT (ER) S1840501-04
AP INTEGRA (ER)

S1850501-01

AP INTEGRA

S1850501-02

AP INTEGRA (ER-N)

S1850501-03

AF INTEGRA (ER)

S1851501-01

AF INTEGRA

S1851501-02

AF INTEGRA (ER-N)

S1851501-03

AF-H INTEGRA (ER)

S1852501-01

AF-H INTEGRA

S1852501-02

AF-H INTEGRA (ER-N)

S1852501-03

Summary of Contents for RC102





















Reviews:

No comments