5
TEST
- Turn the TIME knob anti-clockwise on the minimum. Turn the LUX
knob clockwise on the maximum (sun).
- Switch on the power; the lamp will have no signal at the beginning.
After Warm-up 30sec, the lamp can start work .If it receives the
induction signal, the lamp will turn on. While there is no another
induction signal any more, the lamp should stop working within
10sec±3sec.
- Turn LUX knob anti-clockwise on the minimum (moon). If the ambient
light is more than 3LUX, the lamp should not work. If the ambient light
is less than 3LUX (darkness), the sensor would work. Under no induction
signal condition, the lamp should stop working within 10sec±3sec.
Note: when testing in daylight, please turn LUX knob to (SUN)
position, otherwise the sensor lamp could not work!
SOME PROBLEM AND SOLVED WAY:
SAFETY AND MAINTENANCE
The load do not work:
a. Please check if the connection-wiring of power and load is correct.
b. Please check if the load is good.
c. Please check if the working light sets correspond to ambient light.
The sensitivity is poor:
a. Please check if there has any hindrance in front of the detection
window to affect to receive the signal.
b. Please check if the ambient temperature is too high.
c. Please check if the induction signal source is in the detection fields.
d. Please check if the installation height corresponds to the height
showed in the instruction.
e. Please check if the moving orientation is correct.
The sensor can not shut off the load automatically:
a. Please check if there is continual signal in the detection field.
b. Please check if the time delay is the longest.
c. Please check if the power corresponds to the instruction.
- Should be installed by electrician or experienced person;
- Avoid installing it on the uneven object;
- There should be no hindrance and moving objects in front of the
detection windows to affect detection;
- Avoid installing it near air temperature alteration zones like air
condition, central heating, etc;
- Considering your safety, please do not open the cover when you find
the hitch after installation.
- If there is difference between instruction and the function the product
has, please give priority to product and sorry not to inform you
additionally.
