NORLAND
12
5.3 BOILER CASING mod. 160 - 270 (Fig. 5)
•
Fit the panel (1D) by hooking the upper profile to the square tube and the lower to the boiler longheron.
Repeat the same procedure for panel (1S).
•
Fit the panel (2D) by hooking the upper profile to the square section tube and inserting it in the slots in the lower panel.
Repeat the procedure for panel (2S) with the burner-control panel connection cables passing through the aperture
(for
the wiring harness please refer to the control panel diagram and to the standard plugs connection kit).
•
Unwind the thermostat capillaries, fit the control panel to the side, fastening with the screw, then insert
the bulbs in the pocket. Fit the upper panels (4S and 4D).
•
Mount the panel (5); attach the support bracket (6) to the corner of the frame base, position the panel
(7D) and then the panel (7S) with fairlead attached to its side panels. Screw on tightly and plug the pas-
sage holes with the appropriate caps. Attach the front/central panel with fairlead (8) and the front/lower
panel (9). Finally, screw the document holder (10) on to the opposite side of the control panel.
Fig. 5
Summary of Contents for Norland
Page 7: ...NORLAND 6 Mod 340 860 ...
Page 17: ......
