38
39
15.6 Burner
15.6.1. State
15.5.4.2 System confi guration
Menu is used to confi gure the heating system (hydraulic). The possibility of settings is dependent
of number of expansion modules connected in the system.
SYSTEM CONFIGURATION
Function
Description
Number of CH circuits
Specifi es the number of heating circuits in the system.
Number of HW circuits
Specifi es the number of hot water circuits in the system.
Number of buff ers
Specifi es the number of buff ors in the system.
Outside temp. sensor
Specifi es if in the system is installed outside temperature
sensor (module 0).
Return temp. sensor
Specifi es if in the system is installed return temperature
sensor (module 5).
Solars
Specifi es if the system is equipped with solar collectors.
WARNING!
You must fi rst confi gure the modules..
15.5.4.3 Restore to factory settings
This function allows the controller to restore the factory settings.
WARNING!
Will be restored all factory settings, which can cause your system to malfunction.
After restoring the factory settings may be need to reconfi gure the controller settings.
