background image

16

IM0973510 A 12

 Graticule

4.4. Camera FAMOS 102° PAL/NTSC 
Mirror SW

 

The setting of this camera includes a 
graticule. The graticule is designed to 
match with the opening angle of this 
camera.
The graticule is made for a vehicle 
with a width of 2.75m and the length 
that is covered by the graticule is 10m. 
During installation the camera should 
be aimed right to match the displayed 
image with the graticule. Example of 
the displayed graticule in the picture.

5. Maintenance and cleaning

Fixing a blurry image:
If the camera image is blurry, it is
advisable to clean the camera.

Cleaning the lens glass:

Use a soft cloth to clean the lens glass 
of the camera. Use clean water or a 
high quality and safe foam cleaner. 
Rub the camera lens glass clean with 
the cloth.
Do absolutely not use aggressive 
chemicals or abrasive cleaning agents.

 Installation manual

5

1.3.Camera FAMOS IRLED M12 LED 
power off

0,5m cable with 7p molded M16 male 
connector (camera power input and 
video output).

1.4. Aiming the camera.

Attach the top part and bottom part of 
the bracket with the included M3 head 
cap screws and tighten with a torque 
of 0,8 Nm - 1Nm. Allen key included.

Top part bracket

Bottom part bracket

Allen key

 Installation manual

M6 x 20

’

6,5

25

55

Units in mm

19

L= 500mm

Summary of Contents for FAMOS











Reviews: