Orkli SPT 1-160, Technical Manual

Page: 18 / 32

18
The company preserves the right to change all specifications of the products and their accessories without prior notice
9. Place and tighten the Ø22 mechanically tightened plug on the top right and on the bottom left of the collector/
collectors*. Place the water storage tank on the base with its electrical components to the left, when viewing the
water storage tank from the front.
10. Centre the water storage tank’s position on the collector/s. Rotate the water storage tank (if necessary) in order
for the cold and hot domestic water sockets to remain vertical to the horizontal surface. Screw the water storage
tank onto the base using the screws provided in the packaging. Ensure the appliance is not tilted and is properly
levelled. It is necessary to use a level.
11. Place the small flexible tube on the special connection DN16 INOX at the water storage tank’s side where the
heating element is located and to the socket marked “collector intake”.
12.
Join the other end to the top left socket of the collector using the Ø22x DN16 INOX corner fitting,* having firstly
passed the tube through the insulation pipe.
13. Place the T-piece with the filling valve to the socket on the right side of the water storage tank marked “collector
return”.
14. Place the big flexible tube with the special connection to the T-piece on the right side of the water storage tank.
6. In case of two collectors, first place the left one to the bottom part 5 lifting the upper part 5 . Place the screws with
the support washers of the collector (4 for each collector) without tightening them. Place the Ø22 mechanically
tightened unions at the edges of the collector.
7. Join the second collector and
tighten the unions*.
8. Screw on the two supports 7 of the tank. Tighten all screws on the base. Properly orientate the base with the
collector. Firmly attach the base using 4 Upat D10 and bolts (M8x60).
N
S N
S
Northern Hemisphere Southern Hemisphere
60mm
7