7
7) Delay Function
( This function only through by Remote control.)
1. This function can be use should be fit two points :
1. the appliance is in the standby state.
2. before the appliance working.
This function only through by Remote control.
2. Press “ ” button light on LED display, then press “ ” button one time, the
“Delay” light and ”I/W” light are on.press “
” two buttons set the Hours
from 01--24(01=1 o’clock,24=24 o’clock...00=Closed ect.)
---------------------------------------------------------This is open time
3. Press “ ” button again, the “Delay” light and ”II/H” light are on. Press “
”
two buttons set the Hours from 01--24(01=1 o’clock,24=24 o’clock...00=Closed
ect.)
---------------------------------------------------------This is close time
PS: Press “ ” button,screen shows number will flashes 5 seconds,you should
operate in time, otherwise appliance will get back to standby, you need press “
” button to awaken the appliance and reset again all.
(This function is one-time and must be reset if the power is cut off.)
8) Child-Lock Function
1. This function only through by Remote control.When appliance are plug
in,this function can be used in any models.
2. Press “ ” button one time, all lights and LED display are closed ,only
“Power” light on.In this condition, either control panel or remote control can
not operate the appliance for any function.
3. Press “ ” button again, all lights are on and both control panel and remote
control are use to succeed.
CONTROL PANEL VIEW: