6
3.P6
is user-defined,press “
” two buttons select P6 model,
WEEK
Press “ ” button 1st time,”” lights on, means “Monday”.
HOUR
Press “ ” button 2nd times, LED display front “00” flashes,
press “
” two buttons set the Hours from 01--00(01=1 o’clock,02=2
o’clock...00=24 o’clock ect.)
MINUTE
Press “ ” button 3rd times, LED display behind “00” flashes “
”
two buttons set the Hours from 00--59(01=1 Minute,02=2 Minute ect.)
With the “
” light on,it means open time.
HOUR
Press “ ” button 4th times, LED display front “00” flashes,
press “
” two buttons set the Hours from 01--00(01=1 o’clock,02=2
o’clock...00=24 o’clock ect.)
MINUTE
Press “ ” button 5th times, LED display behind “00” flashes “
”
two buttons set the Hours from 00--59(01=1 Minute,02=2 Minute ect.)
With the “
” light on,it means close time.
The above are finised set Monday Timer.
4. Press “ ” button once more, “ ” lights on,means “Tuesday”. Pls noted
that the operate with open time HOUR/MINUTE and close time HOUR/
MINUTE are all same as before Monday.
5. From Monday-Sunday are all set finished,press “ ” button on remote
control 7th times to set from Monday to Sunday’s temperature and press “
” two buttons,select the temperature which you need,the temperature
range from 10
o
C to 49
o
C.
PS:
In Week timer function,when you set today’s temperature,the thermostat
function will start,the rules same as 4) THERMOSTAT INSTRUCTIONS,pls
noted.
You can set different open time ,closed time and temperature within whole
week.
6) Window Open Function
1. Open the appliance as working conditions,(fan,warm,hot are all ok).This
function only through by Remote control.
2. Press “ ” button, the “ ” light is on.The appliance is working as smart
saving energy models.(In this function,the appliance is check and record
environment temperature in immediately.It will stop working, when the
appliance check the environment are drop ≥ 3
o
C.The user should restart
the appliance with “ON/OFF” button)
3. Press “ ” button again, the “ ” light is off.Window Open Function is
closed.