Orite ic301, User Manual

Page: 6 / 40

- 6
1. Insert the power-cord to IP-Cam.
2. Insert the Network Line to IP-Cam and Computer LAN Card RJ-45 port (Red color LAN
Cable).
3. Power-On the Computer for IP setup.
4. Use the IPEdit.exe tools to find the IP-Cam.
5. Use IE to view the IP-Cam image.
Step 1. Plug the Ethernet cable into IP-Cam
Plug the included RED Color Ethernet cable into the
RJ- 45 connector at the back of the camera as
shown.
Step 2. Plug the Ethernet cable into PC
1. Temporarily disconnect the existing network
cable from the PC.
2. Plug the other end of the Ethernet cable into any
available LAN port. A typical home router/gateway
connection is shown on the left.
Step 3. Connect the Power Supply to the IP-Cam
Connect the power supply to the back of the
IP-Cam as shown, and then plug the supply into an
available power outlet.
Step 4. Ensure the IP-Cam power light is lit
When the IP-Cam is connected with power, the
LED light on top of the IP-Cam will light up. This
indicates that the IP-Cam is powered on.
Step 5. Using IPEdit.exe to test the IP-Cam
1. Use IPEDIT.EXE to find the installed IP-Cam.
2. The IP-Cam without IP allocated by DHCP will