Installation and User’s Guide
http://www.orionimages.com
2. Make any lateral shift adjustment and lock it by tightening the two (2) M6 x 30mm Phillips
screws found on the bottom of the mounting brackets. Use the foot leveler to adjust your
plasma.
CAUTION:
Do not over tighten the M6 x 30mm screws to the rods (Figure 18).
NOTE:
To remove the display from the wall simply back off the M6 x 30mm screws using
a Phillips screwdriver and lift the unit of the wall carefully.
14
7300 Bolsa Avenue, Westminster CA 92683 / Tel: 714-766-6300 / Fax: 714-766-6310
pg14