Orion Vortex R10 pro, Instruction Manual

Page: 19 / 68

ww.teamorion.com 19
Only one firmware can be installed inside the ESC but you
can replace it as many times as you wish by using the PC
software and optional program box.
The use of the optional programming box and custom PC
software is necessary to replace the firmware inside the ESC.
The use of the optional programming box is necessary to
modify the advanced parameters of the ESC.
The ESC firmware is included in the PC software. If
required we will release firmware updates on our website
www.teamorion.com/R10-downloads.html.
The “stock” firmware has been specifically designed for
“stock” sensored brushless motors to drastically increase
their performance. It is possible to use this software with
faster “modified” sensored brushless motors, but if you use
inadequate settings, you risk damaging the motor and/or
ESC. Always start with lower value settings and increase the
values gradually after making sure that the ESC and motor
are able to withstand the performance increase.
ADVANCED SETUP PARAMETERS
Depending on whether the “modified” or “stock” motor
firmware is installed in the ESC, the available parameters will
change. The “stock” firmware has more parameters.
10. Boost Timing
This is the base timing setting, similar to adding timing
on the motor itself (be aware though that it is still applied