PROFESSIONAL
SuRvEILLANcE SYSTEM
6
vIDEO DOOR PHONE
18cm LcD mONITOR
Sc122
8 OpEratIOn
›
lcD DIsPlAy settINg
Press
Home menu/settings button to go into
LCD display setting menu, to adjust LCD display
brightness, contrast, saturation and reset. Inside
the LCD display setting menu, press
Home
menu/settings button to navigate to between
Brightness, Contrast, Saturation and Reset
options, then press
or
button to adjust
the setting.
›
brightness adjustments
The brightness is divided into different divisions,
press
or
to adjust the setting.
›
contrast adjustments
The contrast is divided into different divisions,
press
or
to adjust the setting.
›
saturation adjustment
The saturation is divided into different divisions,
press
or
to adjust the setting.
›
reset
Press the
to reset to factory setting.
›
exit
Press
or
to exit LCD display
setting menu.
›
INtercom
When the door bell button on outdoor camera
got pressed, the video monitor bell chime will
ring, activate the video monitor LCD screen
and display images from the outdoor camera
automatically.
Press
intercom button to communicate with
the outdoor camera. When you have finished,
press
intercom button again, the video
monitor LCD screen will switch off automatically.
›
monitoring
Press
intercom button, the video monitor
LCD screen will display images from the outdoor
camera. Press
intercom button again, the
video monitor LCD screen will switch off.
›
unlock
If electric door strike is installed, press
unlock button to unlock door strike.
›
Door bell chime setting
Press
Door bell chime selection button to
select different door bell chime. There are
24 different door bell chimes.
›
ring Volume Adjustment
Press
or
button to adjust door bell
chime volume.
›
mute
Press
mute button to go into mute mode.
In mute mode, when the door bell button on
door camera unit got pressed, the mute indicator
LED will flashes, no bell chime and the video
monitor LCD screen will just display images from
the door camera unit.
7 fOr ExtEnDED WIrInG
For extended wiring, existing wiring or CAT5E/CAT6
cable can be used. For use of CAT5E/CAT6 cable,
pairing of wires is recommended for installation.
Ensure that you match up connections at each end
by following the conductor colouring.
Note: maximum distance for extended wiring, retrofit existing
wiring or CAT5E/CAT6 cable connection is 100 metre.
