OSD-400/OSD-800/OSD-1600
Install & User Manual - Firmware 3.X
98
If clicking delete button without INDEX, previously selected INDEX will be deleted first and after that,
from the largest INDEX in order.
Edition
Select INDEX to edit and change weekday, program, time directly.
In case that INDEX 50 are all configured, select the time zone to change by mouse click and click the
time again, pervious configuration will be deleted and new configuration will be shown.
Caution:
If selecting the same time twice, “!” will be shown on the chart.
When configuring time sector, previously configured time can not be included.
De-interlace
Set playback de interlace On/Off.
It works on Full 4CIF recording. In “On” status, screen vibration of paused Full 4CIF video will be
reduced.
6.6.2.3 Event recording setup
Select resolution and frame rate and quality for event recording.
There are 4 triggers – Sensor, Motion detection, Text, Digital input.
First, select the program and check resolution and frame rate and quality of the channel.
(Refer to “6.6.1 Program setup”)
Event recording can sync “Manual & Event”, “Schedule & Event”.
Select among “Manual&Event”, “Schedule&Event” in “Recording mode” of [Record configuration]-
[recording]
Reference: Check below to configure event recording.
