Two Channel Bridged Configuration
●
Front and rear channels are configured for bridged two-channel operation.
●
Lowest recommended impedance for both front and rear channels is 4
W.
●
Crossover and gain configurations are independently adjustable between the
front and rear channels.
●
Two-channel operation is recommended for this operational mode.
●
Front and rear outputs can be configured for high-pass, low-pass, or full range
operation.
●
Front and rear outputs can be configured for stereo (right channels will have right
output, left channels will have left output) or summed two-channel operation
(front speaker bridged, rear speaker bridged).
●
Only the rear speaker is controlled when using the RGC-1.
Three Channel Stereo/Bridged Configuration
●
Front channels are configured for two-channel stereo operation.
●
Front channel lowest recommended impedance is 2
W
stereo.
●
Rear channels are configured for a single channel bridged output.
●
Rear channel lowest recommended impedance is 4
W.
●
Crossover mode, output and gain configurations are independently adjustable
between the front and rear channels.
9
©2004 Directed Electronics, Inc.
