![Orion OLME-K4950 User Manual Download Page 29](http://html1.mh-extra.com/html/orion/olme-k4950/olme-k4950_user-manual_1652674029.webp)
6.5. Explanation of the command transmission method.
•
Please wait for at least 10 seconds before executing "Power On" command
after the first AC power connection. If not, it may cause abnormal behavior.
•
Please disconnect AC power and reconnect in case of abnormal behavior.
Caution
※
All Protocol commands are affected by the command transmission method.
6.6. Basic Control
•
To control basic operation in Main Screen.
•
You select MLCD sets in "Screen Configuration Window" clicking the left button of
the mouse. Maybe you want to select more than one MLCD set, drag the mouse.
Then you can transmit the Protocol command respectively to selected MLCD Sets.
•
When broadcast checkbox is checked, entire command transmission method is
broadcast. You can transmit the Protocol command simultaneously to all connected
MLCD sets.
■
Normal Transmission Method.
■
Broadcast Transmission Method.
•
POWER :
“ POWER ON/OFF " button is to control power of selected MLCD Sets.
•
MULTISCALE :
“ Full Screen On " button is to make multiscaling screen. “ Full Screen Off "
button is to make individual screen.
< Full Screen On >
< Full Screen Off >
•
Drag the panel -
> Click the “Full Screen On” button
- 54 -
- 55 -
Summary of Contents for OLME-K4950
Page 4: ......