Orion OLME-K4950, User Manual

Page: 19 / 42

5.1. Picture Menu
ㆍ
Use this menu to activate Brightness/Contrast/sharpness and the luminance of the
backlight adjustment.
5. OSD Menu
[Input Menu Table]
[Picture Menu Table]
5.2. Input Menu
ㆍ
Use the Input Source menu to select between different video inputs that are be connected to the
monitor.
Picture Multi-Display Input
Backlight Brightness Contrast Sharpness
MUL
TI
Other
DP HDMI DVI
Picture Input
Multi-Display
MUL
TI
Other
Menu Sub Menu Description Range
Input
DP Select DP input when you are using the DP (DisplayPort) connector. -
HDMI
Select the HDMI input when you are using the HDMI connector.
Use to select the HDMI input source.
-
DVI Select DVI input when you are using the DVI connector. -
Menu Sub Menu Description Range
Picture
Backlight
Backllight adjusts the luminance of the backlight
0 ~ 100
Brightness Brightness adjusts the brightness of the monitor. 0 ~ 100
Contrast
Contrast adjusts the difference between darkness and lightness
on the monitor. Adjust the Brightness first, and then adjust
Contrast only if further adjustment is necessary.
0 ~ 100
Sharpness Sharpness adjusts the sharpness of the monitor 0~4
GAMMA Select a display gamma for best picture quality.
1.8/2.0/
2.2/2.4
TEMPERATURE
Adjust the color temperature of the screen. If Color Temperature
needs further adjustment, the individual R/G/B levels of the white
point can be adjusted. Can be used only in User mode of Color
Temperature.
10000/
9300/
6500/
USER
Studio Mode
Select Studio Mode. The color temperature of Studio Mode is
about 3200K.
ON/OFF
HUE Adjustment the hue value of the screen. 0 ~ 100
SAT Adjustment the saturation value of the screen. 0 ~ 100
Menu Sub Menu Description Range
Picture Color Range
Select Color Range for input signal Only applied to HDMI, DVI).
The color range of DP is detected Automatically
Limit/Full
- 34 - - 35 -