http://www.orion.ua
5
Troubleshooting
Fault Phenomenon
Reason
Solution
1. Mist projector works
normally, but
without mist spray
a. Water could be contaminated with
other substances or chemicals
b. Water tank could be cracked
c. Water tank could be empty
a. Clean out the water tank and
replace with clean water
b. Pour out the water and check for
cracks
c. Refill the water tank. A full tank of
water will last approximately 8
hours
2. Mist projector doesn’t
work
a. Bobber doesn’t float
b. Water tank could be empty
a. Free the bobber and allowit to
float freely.
b. Refill the water tank. A full tank of
water will last approximately 8
hours
3. No indicator light, no
wind, no mist.
a. Power cord is unplugged, and
electric power is power off
a. Plug the power cord, and turn on
the electric power
4.Peculiar smell from
the mist
a. When new, there might be residue
in the water tank/mist plate.
b. The water in the water tank many
be contaminated.
a. The smell should disappear after
further use.
b. Clean out the water tank and
refill with fresh water
5.The fan doesn’t work
as normal
a. The plug and supply cord are
damaged b. The
blades are bend
c. Don’t safety device
a. Find service agent or a suitable
qualified person to change or
service b. Don’t play the blades.
Use soft damp cloth then wipe with
dry cloth
c. Installed correctly in accordance
with the manual. Can not be
installed until there is no electricity
WARNING
: Unplug from electrical supply source before cleaning. After servicing, any safety
device (including grilles and blades) must be reinstalled or remounted as previously installed.
Use soft damp cloth then wipe with dry cloth. Do not use harmful cleaners. Do not bend the
blades.
If the plug and supply cord are damaged, it must be replaced by the manufacturer, its service
agent or a suitable qualified person in order to avoid a hazard.
Extra information on ORION company web-site
www.orion.ua
We take your opinion and offers by E-mail