New Multi Function Controller
4
| ORION CO., LTD.
ORION CO., LTD. |
5
Introduction
New MFC (Multi Function Controller) is designed for functional expansion and compensation
in communication and users’ convenience. It provides various communicational interfaces
of Serial, USB and Ethernet and also provides 4-channel daisy chain port to solve the most
critical problem of serial communication. Users can find out the status of the product with the
LED indicators. It is also functioning as a receiver for Remote-controller.
Features
Product is mainly controlled through the Serial communication (RS-232C). However, gradually,
USB and Ethernet port are replacing Serial port in control devices such as computers. New
MFC can support either case. Based on installation circumstance or Users’ preference, Serial
(RS-232), USB or Ethernet can be selected. Especially, Ethernet allows controlling product
through LAN network or even with Internet. Users can have better communication quality
with 4-channel serial port equipped in a New MFC. It helps avoiding possible undesirable
communicational distortion from multiple daisy-chains.
Advantages
1. Expand the communicational functions of product. (Serial / USB / Ethernet / IR)
2. Prevent possible communicational distortion from using Serial port by 4-channel serial
port.
3. Control the main functions of product and by a remote controller without additional
applications.
※
Control the main functions of product and DVI converter by a remote controller without
additional applications. (MFC-4250)
1. Note :
Use two 1.5V AAA-type batteries.
Do not mix old and new batteries,
Do not mix different types or makes of
batteries. Mixed use of Alkaline, Manganese
or Re-chargeable batteries are NOT
recommended.
Only use two batteries of
the same type and make.
2. How to mount batteries
Slide the cap at the rear side of the remote controller to open.
Insert batteries with the correct polarity and close the cap.
Remote Controller
(For MFC-4250)
* This Remote Controller is only for the MFC-4250.
* This Remote Controller can control the OPM-4250 and DVI-Converter.
02.
Product Introduction
03.
User Guide Information
REMOTE CONTROL
ON
OFF
INFO
A
SET
DVIC1
DVIC2
INFO
AUTO
VIDEO S-VIDEO HDSDI
DVI
PC
DTV
HDMI
B
BROADCAST
ID SETTING
ON
OFF
1
2
3
4
5
6
7
8
0
9
DVI 1
DVI 2
OUTPUT
FUNCTION
INPUT SELECT
BROADCAST
Broadcast is the function to control
all product sets at once. It is applied
for Power On/Off and Auto tracking.
MPDP Input select
Select DVI input of MPDP,
DVI 1 or DVI 2.
Function A / B
Enter to the test mode of New MFC
DVI Converter Input Select
Select source input for DVI converter.
DVI Converter INFO / AUTO
Check the current status information
of DVI converter and execute Auto
tracking.
POWER ON/OFF
Turn on/off product.
ID Setting
Set the number of product in hori-
zontal and vertical positions. (XxY)
X x Y Setting
Enter X x Y setting mode.
Direct & Info key
Select directions to set the number
of product (horizontal or vertical) and
check the status of product.
DVI Converter Output
Select DVI Converter output,
DVIC1 or DVIC2.
