background image

WARRANTY

LIMITED ONE-YEAR CONSUMER WARRANTY/LIMITED TWO-YEAR CONSUMER WARRANTY 
FOR AUTHORIZED DIRECTED DEALER PURCHASE & INSTALLATION

Directed Electronics (herein “Directed”) promises to the original purchaser, to repair or replace with a 
new or refurbished unit (at Directed’s sole and absolute discretion) this product should it prove to be 
defective in workmanship or material under normal use, for a period of *two-years from the date of 
purchase from the authorized Directed dealer PROVIDED the product was purchased and installed by 
an authorized Directed dealer. During this *two-year period, there will be no charge for the repair or 
replacement PROVIDED the unit is returned to Directed, shipping prepaid, along with the required proof 
of installation, the bill of sale or other dated proof of purchase, and the consumer’s contact information. 
If the unit is installed by anyone other than an authorized Directed dealer, the warranty period will be 
one-year from the date of purchase. This warranty is non-transferable and does not apply to any unit 
that has been modified or used in a manner contrary to its intended purpose, and does not cover damage 
to the unit caused by installation or removal of the unit. During this one-year period, there will be no 
charge  for  the  repair  or  replacement  PROVIDED  the  unit  is  returned  to  Directed,  shipping  pre-paid, 
along with the bill of sale or other dated proof of purchase and the consumer’s contact information. This 
warranty is void if the product has been damaged by accident or unreasonable use, neglect, improper 
service or other causes not arising out of defects in materials or construction. This warranty does not 
cover the elimination of externally generated static or noise, or the correction of antenna problems or 
weak reception, damage to speakers, accessories, electrical systems, cosmetic damage or damage due 
to  negligence,  misuse,  failure  to  follow  operating  instructions,  accidental  spills  or  customer  applied 
cleaners,  damage  due  to  environmental  causes  such  as  floods,  airborne  fallout,  chemicals,  salt,  hail, 
lightning or extreme temperatures, damage due to accidents, road hazards, fire, theft, loss or vandalism, 
damage due to improper connection to equipment of another manufacturer, modification of existing 
equipment, or Product which has been opened or tampered for any reason. Units which are found to 
be damaged by abuse resulting in thermally damaged voice coils are not covered by this warranty but 
may  be  replaced  at  the  absolute  and  sole  discretion  of  Directed.  Unit  must  be  returned  to  Directed, 
postage pre-paid, with bill of sale or other dated proof of purchase bearing the following information: 
consumer's name, telephone number, and address, authorized dealer's name and address, and product 
description. Unit must be returned to the following address: ATTN: WARRANTY DEPARTMENT, Directed 
Electronics , 1 Viper Way, Vista, CA 92081. Note: This warranty does not cover labor costs for the removal 
and  reinstallation  of  the  unit.  IN  ORDER  FOR  THE  TWO-YEAR  WARRANTY  TO  BE  VALID,  YOUR  UNIT 
MUST BE SHIPPED WITH PROOF OF INSTALLATION BY AN AUTHORIZED DIRECTED DEALER. ALL UNITS 
RECEIVED BY DIRECTED FOR WARRANTY REPAIR WITHOUT PROOF OF DIRECTED DEALER INSTALLATION 
AND PURCHASE WILL BE COVERED BY THE LIMITED 1 YEAR WARRANTY.

BY  PURCHASING  THIS  PRODUCT,  ALL  WARRANTIES  INCLUDING  BUT  NOT  LIMITED  TO  EXPRESS 
WARRANTY,  IMPLIED  WARRANTY,  WARRANTY  OF  MERCHANTABILITY,  FITNESS  FOR  PARTICULAR 
PURPOSE,  AND  WARRANTY  OF  NON-INFRINGEMENT  OF  INTELLECTUAL  PROPERTY  ARE  EXPRESSLY 
EXCLUDED  TO  THE  MAXIMUM  EXTENT  ALLOWED  BY  LAW,  AND  DIRECTED  NEITHER  ASSUMES  NOR 
AUTHORIZES  ANY  PERSON  TO  ASSUME  FOR  IT  ANY  LIABILITY  IN  CONNECTION  WITH  THE  SALE  OF 
THE PRODUCT. DIRECTED HAS ABSOLUTELY NO LIABILITY FOR ANY AND ALL ACTS OF THIRD PARTIES 
INCLUDING ITS AUTHORIZED DEALERS OR INSTALLERS. IN NO EVENT WILL DIRECTED BE LIABLE FOR ANY 
INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES (INCLUDING LOSS OF PROFITS). BY PURCHASING 
THIS PRODUCT, THE CONSUMER AGREES AND CONSENTS THAT ALL DISPUTES BETWEEN THE CONSUMER 
AND DIRECTED SHALL BE RESOLVED IN ACCORDANCE WITH CALIFORNIA LAWS IN SAN DIEGO COUNTY, 
CALIFORNIA. This warranty is only valid for sale of Product within the United States of America. Product 
sold outside of the United States of America is sold “AS-IS,” and shall have NO WARRANTY, express or 
implied. Some states do not allow limitation on how long an implied warranty lasts. In such states, the 
limitation or exclusions of this Limited Warranty may not apply. Some states do not allow the exclusion 
or limitation of incidental or consequential damages. In such states, the exclusion or limitation of this 
Limited Warrantymay not apply to you. This Limited Warranty gives you specific legal rights, and you may 
have other rights which vary from state to state.  

 

 

 

 920-0033 Rev 02-07

© 2007 Directed Electronics.  All rights reserved.     

 

 

 

G37206.07 2007-09

For more information on Orion products please visit www.orioncaraudio.com

Summary of Contents for HCCA 5.2













Reviews: