Orion Flex, Quick Start Manual

Page: 6 / 9

Bulletin #: V012116-01
Issue Date: January 21, 2015
Orion Packaging Systems * A division of Pro Mach
4750 County Road 13 NE Alexandria, MN 56308
(800) 333-6556
http://www.orionpackaging.com/landing/flex-manual-download/
Page 6 of 9
Quick Start Guide
Adjusting Wrap Settings

To adjust the wrap setting, you must be logged in. Press the login button in the
bottom left corner of the screen

Enter the password then press the X to close the keypad.

Press the Wrap Settings button to display the Wrap Settings Screen.

Press the Top Wraps button to set the number of top wraps applied to the load.
Parameters are 1-20.

Press the Bottom Wraps button to set the number of bottom wraps applied to the
load. Parameters are 1-20.

Press the Carriage Up Speed % button to change the speed of the carriage on
the upward move, in terms of percentage. Min - 5% Max - 100% The slower the
move, the more film overlap on the load.

Press the Carriage Down Speed % button to change the speed of the carriage on
the downward move, in terms of percentage. Min - 5% Max - 100% The slower
the move, the more film overlap on the load.

You may choose more advanced wrap settings for Wrap Direction, Speed
Selection, and Autoheight or Film Fault Enable/ Disable. See your manual for
more information on these wrap setting adjustments.