Bulletin #: V012116-01
Issue Date: January 21, 2015
Orion Packaging Systems * A division of Pro Mach
4750 County Road 13 NE Alexandria, MN 56308
(800) 333-6556
http://www.orionpackaging.com/landing/flex-manual-download/
Page 3 of 9
Quick Start Guide
Jogging
Go to the Menu Screen. Choose Jogging.
If you have an HPA or LPA you will see the Brush & Cutter and Film Clamp
buttons. If you have an HPD or LPD, you will not see these buttons.
It’s advisable to jog the machine prior to wrapping your first load to ensure
components run smoothly and there are no mechanical binds caused by
shipping.
o
Press and hold the Main Drive button to jog the turntable/ tower. Allow it
to travel about one full revolution, then release the button.
o
Press and hold the Carriage Up button. Allow it to travel to the adjustable
top stop on the mast, then release the button.
o
Press the Home Machine button to bring the Turntable/ Tower and
Carriage back to the Home position.
o
If you have an A model, press Brush and Cutter to cycle the Brush and
Cutter.
o
If you have an A model, press Film Clamp button. Each press of this
button will move the clamp to the next position. Return the clamp to the
down and clamped position.
