Orion BuckEye Cam RC-5030, Owner'S Manual

Page: 34 / 62

32 6. PCBase System Setup
NOTE: In version 3.6 of the ORION PCBase Software there is only one
command available. As firmware and software updates are released,
more commands may be added to this menu in the future.
Status Indicators
Message:
This indicator displays information from the last command given to the
camera.
Pics On Camera:
This label displays the number of pictures on the camera that still need to
be transmitted. When a picture is transmitted from the camera to the PC
Base, the number is updated. This indicator is updated every time a camera
takes a picture. If the counter says N/A the PCBase does not know yet how
many pictures are at the camera. Click the
button. This
button besides getting the battery/signal info will also update the indicator
to the current value.
Receiving:
Displayed when receiving a picture from the camera. Shows the picture
transfer progress.
Signal from the camera:
Displays the strength of the signal at the base, i.e. “how well the base can
hear a camera.”
Note: This is different from the signal shown below .
Battery and Signal:
Display the status of the battery level at the camera and the strength of the
signal at the camera, i.e. “how well the camera can hear the base.”
Click the
button to check the battery and signal at the
camera.
Status:
Displays the status of the camera. OK means that battery is good.
Low Battery means that the camera is in low battery mode. While in this
mode, the camera will not communicate or take pictures, however it will
preserve any pictures that have not yet been transmitted. User must plug a
ORION - Owner's Manual, Rev. 3.6