Orion AG 360 RoboWrapper Manual Download Page 42

Page: 42 / 92

Machine Manual

Orion

AG 360 RoboWrapper

Revision 1.1

System Operation

28 June 2017

Page 3-10

Universal Go-To Buttons

The buttons in the chart below are found throughout most HMI screens. The buttons allow
the user to easily navigate back to any of the screens.

Table 3-1. The Universal Go-To Button Descriptions

STATE 1

DESCRIPTION

Press this button to go to the Run Screen. The icon will illuminate in green when the
screen is currently active.

Press this button to go to the Recipes Screen. The icon will illuminate in green when
the screen is currently active.

Press this button to go to the Menu Screen. The icon will illuminate in green when
the screen is currently active.

Press this button to go to the Machine Settings Screen. The icon will illuminate in
green when the screen is currently active.

Summary of Contents for AG 360 RoboWrapper





























































































Search results

Summary of Contents for AG 360 RoboWrapper

Reviews:

Related manuals for AG 360 RoboWrapper

Brands by name

Popular brands

Orion AG 360 RoboWrapper, Manual

Search results

Summary of Contents for AG 360 RoboWrapper

Reviews:

Related manuals for AG 360 RoboWrapper

Brands by name

Popular brands