Orion 5Q740 User Manual Download Page 3

SAFETY INSTRUCTION

1. Read all of these instructions.

2. Save these instructions for later use.

3. Follow all warnings and instructions marked on the product.

4. Unplug this product from the wall outlet before cleaning.

Do not use liquid cleaners or aerosol cleaners. Use a dry cloth for cleaning.

5. Do not use this product near water.

6. Do not place this product on an unstable cart, stand or table.

The product may fall, causing serious damage to the product.

7. Slots and openings in the cabinet and the back or bottom are provided for

ventilation: to ensure reliable operation of the product and to protect it from
overheating these openings must not be blocked by placing the product on a bed,
sofa, rug or other similar surface. This product should never be placed near or over
a heat register.
This product should not be placed in a built-in installation unless proper ventilation
is provided.

8. This product should be operated from the type of power source indicated on the

marking label. If you are not sure of the type of power available consult your dealer
or local power company.

9. This product is equipped with a 3 wire grounding type plug having a third(grounding)

pin. This is a safety feature. If you are unable to insert the plug into the outlet,
contact your electrician to replace your obsolete outlet. Do not defeat the purpose of
the grounding-type plug.

10. Do not allow anything to rest on the power cord.

Do not locate this product where persons will walk on the cord.

11. If an extension cord is used with this product, make sure that the total of the

ampere ratings on the products plugged into the extension cord do not exceed the
extension cord ampere rating. Also, make sure that the total of all products
plugged into the wall outlet does not exceed 10 amperes.

12. Never push objects of any kind into this product through cabinet slots as they may

touch dangerous voltage points or short out parts that could result in a risk of fire
or electric shock. Never spill any kind of liquid on the product.

Summary of Contents for 5Q740

















Reviews: