background image

5

on the tripod itself. If the tripod has a 3/8” post, you will need 
to remove the 1/4”-to-3/8” thread adapter from the telescope’s 
tripod adapter (

Figure 6

), to expose the 3/8” threads. This can 

be done using a flat-blade screwdriver, as the thread adapter 
has two opposing slots on its top edge to accommodate a 
screwdriver blade. If the tripod has a ¼”-20 post, then the 
TableTop base can be threaded on as equipped right out of 
the box. 
Simply thread the base onto the tripod’s threaded post until 
tight (

Figure 7

). 

Using the EZ Finder II Reflex Sight

The included EZ Finder II reflex sight (

Figure 8

) makes point-

ing your telescope almost as easy as pointing your finger. It 
permits easy object targeting prior to observation in the high-
er-power main telescope. It superimposes a red dot gener-
ated by an internal LED light on the sky, showing right where 
your telescope is pointed (

Figure 9

). 

Before you can use the red dot finder scope, you must remove 
the small tab sticking out from the battery compartment. Doing 
so will allow the pre-installed 3V CR-2032 button cell battery 
to make contact with the finder scope’s electronic circuitry to 
power the finder’s red LED illuminator. The tab can then be 
discarded. 
Turn the power knob clockwise until you hear the “click” 
indicating that power has been turned on. Look through the 
back of the reflex sight with both eyes open to see the red 
dot inside the sight tube. Position your eye at a comfortable 
distance from the back of the unit. The intensity of the dot 
is adjusted by turning the power knob. For best results when 

Figure 5. 

A)

 The rack-and-pinion focuser on the SkyScanner 100 

TableTop Reflector 

B)

 The focus knob on the StarMax 90 TableTop 

Mak-Cass. 

Thumbscrews

Focus knobs

Focuser

Visual Back

Eyepiece

Star Diagonal

Focus knob

A

B

Figure 6. 

The photo tripod adapter on the bottom of the base 

has a 3/8” threaded insert and a 1/4”-to-3/8” thread adapter 

installed.

3/8" threaded insert 

with 1/4" to 3/8" 

thread adapter

Photo tripod 

adapter

Figure 7. 

Mounting the TableTop base on a photo tripod.

Summary of Contents for 10012 SkyScanner

















Reviews: